The only completely air cooled centrifugal compressor

The only completely air cooled centrifugal compressor


Turbo Air Cooled 2000 designed for applications where there is a limited supply or no water available for cooling.

 

Power Flow Pressure
15.6 – 48.1 m³/min 93 – 260 kW 3.8 – 10.3 barg
125 – 350 HP 550 – 1,700 cfm 55 – 150 psig

The most efficient package

The most efficient package


Turbo Air 2000 designed for easy installation, operation and maintenance to reduce life cycle cost by increasing efficiency and high reliability.

 

Power Flow Pressure
93 – 260 kW 14.3 – 48 m³/min 3.5 – 10.3 barg
125 – 350 HP 505 – 1,700 cfm 50 – 150 psig

The best centrifugal in its class

The best centrifugal in its class


Turbo Air 3000 designed for outstanding performance and compact design which able to save up to 30% of valuable space.

 

Power Flow Pressure
300 – 600 kW 57 – 113 m³/min 3.5 – 10.3 barg
400 – 800 HP 2,000 – 4,000 cfm 50 – 150 psig

Trubo Air 6000

Trubo Air 6000


Turbo Air 6000 offer the most advanced package available for easy, low-cost installation and operation

 

Power Flow Pressure
600 – 1305 kW 113 – 227 m³/min 3.5 – 10.3 barg
800 – 1750 HP 4,000 – 8,000 cfm 50 – 150 psig

HSC Series

HSC Series


HSC series compressors are manufactured to be employed different areas of application without any performance loss. High performance and quality grade parts used to provide long maintenance periods and low operating costs

 

Power Flow Pressure
15 – 315 kW 2.26 – 52.5 m³/min 7.5 – 13 barg
20 – 430 HP 80 – 1854 cfm 109 – 189 psig

Frecon Plus Series

Frecon Plus Series


Frecon Plus series variable speed drive (VSD) compressors are designed to reduce energy consumption of the facilities.

 

Power Flow Pressure
5.5 – 315 kW 0.91 – 54.1 m³/min 7.5 – 13 barg
7.5 – 430 HP 32 – 1911 cfm 109 – 189 psig

Wave Series

Wave Series


WAVE Series starting air compressors develop for all applications where medium pressure is a must, especially for the maritime sector.

 

Power Flow Pressure
11 – 37 kW 1.07 – 3.52 m³/min 12 – 40 barg
15 – 50 HP 38.1 – 124.6 cfm 174 – 580 psig

HRD Series

HRD Series


HRD Series designed to remove excessive water in compressed air, preventing condensation and moisture from interfering critical processes. Advantages: steady low dew-point, low pressure drop, high power saving and high efficiency ensure the smooth operation and very low maintenance.

HDA Series

HDA Series


Heatless Desiccant Air Dryers provide constant -40 °C pressure dew point. These dryers are designed to supply clean and very dry compressed air for critical applications. Pre-filters and after-filters are supplied along with Hertz Heatless Air Dryers to keep the air stream clean and maintain the integrity of the desiccant medium. A very reliable electronic controller makes sure that the dryer operates perfectly all through the service life of the dryer.

HBP Series

HBP Series


A centrifugal blower and high efficiency heater eliminates the use of valuable compressed air to be used for desiccant regeneration. The completely automatic drying system uses blower to pull ambient Air and pass it through the heater. This hot Air stream flows opposite to drying flow direction. Hot Air above 200 ° C regenerates the moisture inside desiccant bed and strips it completely of all moisture. The advanced control system monitors the dew point and adjusts the heating / regeneration accordingly thereby providing valuable energy savings. The heater circuit is completely insulated ensuring maximum heating efficiency.

Filters Series

Filters Series


Air Filters have been designed to answer the current requirements of compressed air filtering. It enables more comfortable usage for end user better endurance, higher efficiency with lower pressure drop and more port size options.

For more enquiries, please email us today!